The ACiQ Platinum series showcases Extreme Heat - hyper heat technology, providing continuous heating capabilities down to -22 degrees outside. Achieve optimal efficiency for both cooling and heating your space with its high SEER2 and high HSPF ratings.
Quick Facts
- Delivers maximum performance at an affordable cost
- Perfectly suited for spaces of approximately 1,200-1,800 square feet (varies depending on climate)
- Efficient cooling range from -22 degrees to 122 degrees outside temperature
- Efficient heating range from -22 degrees to 75 degrees outside temperature
- Equipped with a gold fin condenser and full-protection coating
- Operates quietly even under heavy workloads
High capacity, high efficiency
The ACIQ Condenser, when matched with the a wall mounted, ceiling cassette, concealed duct, floor mount, or ducted air handler, has enough capacity for large rooms. The dual rotary compressor and variable inverter technology give this system exceptionally high efficiency ratings.
Please note that this model of equipment does not have quick connect line set connectors and is not a DIY unit. Installation materials such as line sets, control wire, drain hose, whip and disconnect are not included, but are available at additional cost in the Accessories section on this page. You will need a professional to add more refrigerant and vacuum the lines as needed. The automated cleaning function will clean your system, but it is recommended to periodically clean the unit's filters manually.
Installation Considerations
Concealed duct system installations require a certain amount of pre-planning, and are similar in scope to a standard home HVAC installation. They are best used in new construction projects or additions. Installation will require flex ducting, register vents, plenums and installation supplies in addition to the equipment components. The Concealed Duct units have a factory-installed pump to lift the condensation. From there you will use PVC to construct a drain system to a safe wastewater location.
Features
- 24,000 btu of Heating or Cooling
- Dry and Fan modes also available
- Good for a medium room in most climates
- Wall mounted thermostat included
Product Specifications
| 36,000 BTU ACiQ Platinum series Single Zone Condenser w/ Extreme Heat | |
|---|---|
| Refrigerant Charge | 25' |
| Weight | 158.950000 |
| Manufacturer | ACiQ |
| HSPF | 10.5 |
| HSPF2 | 8.5 |
| Cooling BTU | 36000 BTU |
| Heating BTU | 40000 BTU |
| Decibel Level (dBA) | 63.5 |
| Electric Heat | Heat Pump |
| Refrigerant | R410A |
| SEER | 16-17 |
| EER | 9.5 |
| Compressor Type | Rotary |
| Liquid Line | 3/8" |
| Suction Line | 5/8" |
| Electrical | 208/230V 1 Phase 60 Hz |
| Max Breaker Size | 50 |
| Min. Breaker Size | 41 |
| Tonnage | 3 Ton |
| BTU/Tonnage | 36,000 BTU/3 Ton |
| Zone Compatibility | Single Zone |
| Height | 31.89" |
| Width | 37.24" |
| Depth | 16.14" |
| Warranty | 12 year compressor, 7 year parts with online registration |
| 36,000 BTU Concealed Duct ACiQ Mini-Split Air Handler | |
|---|---|
| Weight | 59.000000 |
| Manufacturer | ACiQ |
| Cooling BTU | 36,000 BTU |
| Heating BTU | 36,000 BTU |
| Maximum CFM | 1081.76 |
| Decibel Level (dBA) | 49.5 max |
| Electric Heat | Heat Pump |
| Refrigerant | R410A |
| Liquid Line | 3/8" |
| Suction Line | 5/8" |
| Electrical | 208/230V 1 Phase 60Hz |
| Phase | Single Phase |
| BTU/Tonnage | 36,000 BTU/3 Ton |
| Mini-Split Type | Concealed Duct |
| Zone Compatibility | Multi Zone, Single Zone |
| Height | 32.68" |
| Width | 32.68" |
| Depth | 9.65" |
| Warranty | 12 year compressor, 7 year parts with online registration |